2.1 m Australia Temporary Fence for Construction Site Perimeter
Products
Australia temporary fence
Application
Australian construction site fencing and isolation
PROJECT BACKGROUND
An Australian wholesale distributor ordered 1,500 sets of Australia temporary fence systems for a major construction site perimeter project. The complete solution included fence panels, bracing systems, and branded plastic feet.
Designed to comply with AS 4687, the 2.1 m high freestanding system provides secure site isolation, quick installation and reconfiguration, and reliable outdoor durability. All steel components were hot-dip galvanised for corrosion resistance.
OUR SOLUTION
Australia temporary fence
Product Specifications
Each of the 1,500 sets included the following components:
- Fence Panels
- Panel Size: 2.1 m × 2.4 m
- Wire Diameter: 4.0 mm
- Mesh Opening: 65 × 150 mm
- Frame: Ø32 × 2.0 mm round pipe
- Legs: 150 mm
- Frame Ends: Flattened and welded
- Surface Treatment: Hot-dip galvanised
- Bracing System
- Round Pipe: Ø32 × 2.0 mm
- Height: 1.8 m
- Function: Improves stability and reduces panel movement under wind loads
- Installation: Quick-connect design compatible with temporary fence systems
- Plastic Feet
- Colour: Red
- Branding: Custom logo
- Centre Distance: 100 mm
- Function: Provides stable freestanding support on asphalt, concrete, and compacted ground
QUALITY CONTROL
Strict inspections were carried out throughout production to meet project requirements and AS 4687 standards.
- Raw Material Verification: Checked 4.0 mm wire, 65 × 150 mm mesh, Ø32 × 2.0 mm frame pipes, and bracing components.
- Frame End Inspection: Verified flattened and welded ends for secure connections and reduced water ingress.
- Weld Integrity Test: Random weld shear tests and visual inspections ensured consistent weld quality.
- Dimensional Accuracy: Panel size, leg length, and mesh dimensions were checked by batch.
- Bracing Inspection: Structural integrity and compatibility with fence panels were verified.
- Plastic Feet Inspection: Colour, logo quality, 100 mm centre distance, fit, and stability were checked.
- Galvanising Inspection: Coating uniformity and adhesion were inspected.
- Pre-Shipment Audit: Random sets were fully assembled to confirm fit, stability, and installation efficiency.
PROJECT EXECUTION HIGHLIGHTS
- AS 4687 Design: The system was engineered to meet Australian temporary fencing requirements for site safety and perimeter protection.
- 2.1 m Panel Height: Higher than the 1.8 m minimum requirement for enhanced access control.
- 65 × 150 mm Mesh: Balances perimeter security with clear site visibility.
- 4.0 mm Wire & Ø32 mm Frame: Provides reliable rigidity and impact resistance for construction environments.
- Flattened & Welded Frame Ends: Improve connection stability and help prevent internal corrosion.
- Integrated Bracing System: Adds structural support against wind and external loads.
- High-Visibility Red Feet: Improve perimeter visibility while providing stable freestanding installation.
- Hot-Dip Galvanised Finish: Provides long-term corrosion protection for outdoor use.
- 1,500-Set Production: Coordinated manufacturing and container loading supported efficient, damage-free delivery.
POST-INSTALLATION SHOWCASE
After installation around the construction site, the temporary fencing system provided reliable perimeter isolation and flexible site management.
- Professional Appearance: The galvanised panels and red plastic feet created a clear, highly visible site boundary.
- Stable Structure: The 2.1 m panels, Ø32 mm frames, and bracing system maintained reliable stability during use.
- Effective Perimeter Protection: The panel height and mesh configuration helped prevent unauthorised access and separate the public from construction hazards.
- Fast Installation & Reconfiguration: Freestanding plastic feet allowed installation without ground penetration and made relocation easier as work zones changed.
- Outdoor Durability: The hot-dip galvanised coating with 42+ μm zinc thickness provided resistance to rain, UV exposure, and temperature changes.
- Positive Site Feedback: Site managers highlighted the visibility of the red feet, installation efficiency, and professional custom branding.
CUSTOMER FEEDBACK
"The temporary fence system fully met our site requirements, providing excellent strength, stability, and easy installation. The red branded plastic feet improved site visibility, while the galvanised finish delivered consistent quality and durability. Our team was very satisfied and plans to reorder for future projects."
– Procurement Manager, Australian Wholesale Distributor
